BRAKE MASTER CYLINDER TR5/6

BRAKE MASTER CYLINDER FOR TR5/6.

**IMPORTANT**      PLEASE READ THE FOLLOWING FITTING DISCLAIMER...

THERE IS ONLY ONE MANUFACTURER OF BRAKE MASTER CYLINDER FOR THESE MODELS - TRW.

THESE ARE CHEAP UNITS WHICH, 3 YEARS AGO WE WERE SELLING FOR NEARLY £200 +VAT.

WHEN FITTING, THERE IS A VERY HIGH POSSIBILITY THAT, IF THE PEDAL IS DEPRESSED COMPLETELY TO THE BULKHEAD, THAT THE SHUTTLE INSIDE THE MASTER CYLINDER CAN STICK AND MAKE THE UNIT UNUSABLE.

IF THIS HAPPENS THEN IT IS NOT COVERED BY ANY WARRANTY.

WHEN BLEEDING THE SYSTEM THE BRAKE SYSTEM NEEDS TO BE PARTIALLY BLED ALTERNATIVELY BETWEEN THE FRONT AND REAR HALVES OF THE SYSTEM USING 1/2 PEDAL PRESSES UNTIL THE SYSTEM IS "FULL" OF FLUID.

AFTER THIS PROCESS, THE BRAKES CAN BE BLED NORMALLY, STARTING AT THE N/S REAR, BUT ONLY BY PRESSING THE PEDAL 2/3rds OF THE FULL STROKE.

THESE INSTRUCTIONS SHOULD COME WITH THE UNIT WHEN IT ARRIVES AND NEED TO BE FOLLOWED, TO THE LETTER.

ANY QUESTIONS CAN BE ANSWERED BY OUR WORKSHOP TEAM WHO CAN BE CONTACTED BY TELEPHONE ON 01487 842168.